Price Range of 30 Ton Reverse Osmosis Water Treatment Equipment
At present, the market price of 30 ton reverse osmosis water treatment equipment is mainly between 150,000 RMB and 600,000 RMB, with differences mainly caused by configuration grade and customized requirements. The basic single-stage reverse osmosis model equipped with domestic core components is suitable for high-quality raw water such as municipal tap water, generally priced at 150,000–180,000 RMB. It meets basic water demands such as industrial cooling and rinsing, with a system recovery rate above 75%.

30 Ton Reverse Osmosis Water Treatment Equipment Price
Standard configuration models are generally priced at 280,000–400,000 RMB and are the mainstream choice for industrial procurement. Such equipment is normally equipped with imported RO membranes, stainless steel high-pressure pumps and PLC intelligent control systems. The pretreatment system includes quartz sand filter, activated carbon filter and scale inhibitor dosing device, meeting most industrial water quality requirements with effluent conductivity ≤10 μS/cm. For typical configuration, 24 pieces of imported RO membranes alone cost 30,000–50,000 RMB more than domestic ones, while achieving a salt rejection rate ≥98% and extending service life by 2–3 years. High-end customized models range from 400,000 to 600,000 RMB, designed for special water quality conditions. If raw water is high-hardness well water or surface water, additional softener and ultrafiltration pretreatment units are required. If effluent reaches electronic and pharmaceutical grade standards, the process will be upgraded to double-stage RO + EDI, achieving effluent conductivity ≤1 μS/cm. In addition, optional functions such as remote monitoring and concentrated water recycling each add 10,000–30,000 RMB to the cost, yet effectively reduce long-term operational losses.
Three Key Factors Affecting Price
Three core factors determine the price of 30 ton reverse osmosis water treatment equipment. First is core component brand: imported high-pressure pumps cost 20,000–30,000 RMB more than domestic ones, and PLC intelligent control systems are 10,000–20,000 RMB higher than manual types. Second is water quality adaptation: raw water with high impurities requires enhanced pretreatment, increasing cost by 10%–20%; upgraded effluent standards raise process complexity with a price increase of 30%–50%. Third is service guarantee: reputable manufacturers such as DIEN Water Treatment provide installation and commissioning, one-year warranty and lifelong technical support. Their quotations are 15%–20% higher than small workshops, yet offer more reliable long-term maintenance.

30 Ton Reverse Osmosis Water Treatment Equipment Price
Procurement Avoidance Guide
Avoid two major pitfalls during procurement: be cautious of ultra-low-price equipment below 100,000 RMB, which usually adopts inferior membranes and non-corrosive pipelines with cut corners, leading to frequent failures in later operation. Do not blindly pursue high configuration; provide raw water quality reports and required effluent standards first, and let the manufacturer customize a suitable solution. Prioritize suppliers with mature industry cases that balance cost performance and stability.
A 30 ton reverse osmosis water treatment device is a long-term investment. The key to selection is suitability rather than simply chasing the lowest price. Clarify your actual water usage scenario and water quality requirements to choose the most appropriate equipment. For quotations, technical parameters and successful cases tailored to your working conditions, please consult the official website of Xi'an DIEN Water Treatment. We will customize efficient and energy-saving water treatment solutions for you.
Do you know how to choose a reverse osmosis water treatment system?
The service life of industrial pure water equipment and the replacement cycle of consumables
How much does a set of reverse osmosis pure water equipment for industrial boilers cost?
Inlet requirements and process flow of reverse osmosis pure water equipment
What is the difference between primary and secondary reverse osmosis equipment?
What is the working principle of reverse osmosis equipment commonly used in the water treatment industry?