Many customers consult sewage treatment equipment, and the first thing they ask is the water volume specification.After all, everyone is afraid that if the selection is too big, it will waste money and take up space. If the selection is too small, it will not be handled in time, which will affect the EIA and production.For example, how much sewage your site produces every day, how much equipment you should choose, and whether you can customize the appropriate tonnage are the most concerned points for customers.
As a manufacturer of source water treatment equipment, DIEN should first make it clear to everyone that our sewage treatment equipment has complete specifications for the amount of water it treats every day, and it supports customized tonnage, which can be fully adapted to the needs of different scenarios, so customers don't need to make do with it. Make do with it.
Conventional specifications, from 1 ton to 1.000 tons per day, are available in stock, covering most common scenarios.For example, rural retail households and small farmhouses have a small amount of sewage per day, and only a few square meters of water. A small integrated equipment of 1-5 tons is enough. It is small in size and simple to install. There is no need to occupy a special area.There are also residential areas, small hotels, and canteens. The daily sewage volume is about 10-50 tons. It is very suitable to choose the integrated sewage treatment equipment of the corresponding specifications. It occupies a compact area and can achieve fully automatic operation without special care.
The industrial scene is different. The sewage discharge is generally larger and the equipment requirements are higher.Like food factories, farms, and small chemical plants, the daily sewage volume may be 50-200 tons, and it may also contain impurities such as oil, manure, and chemical residues. Our conventional models will be equipped with targeted pretreatment processes to ensure that the treatment is up to standard.Sewage treatment stations in large factories and industrial parks have a greater demand. Conventional models of 300-1000 tons adopt a modular design and can be linked by multiple units to meet the needs of batch sewage treatment.These conventional specifications are stocked in our factory all year round, and can be shipped as soon as the same day after placing an order, without delaying the customer's construction and production progress.
Source manufacturer of DIEN integrated sewage treatment equipment
But not all customer needs can just match the conventional specifications.For example, in some small processing plants, the daily sewage volume is about 12 tons. The conventional 10 tons are not enough, and the 15 tons are wasted. There is no such precise tonnage.There are also large-scale industrial parks and centralized sewage treatment projects, with a daily sewage volume of more than 1.000 tons, and conventional models simply cannot meet the treatment needs.At this time, it is necessary to customize the tonnage, which is also one of the core services of our manufacturers.
We support a full range of tonnage customization, whether it is a small demand of less than 1 ton, such as rural single-family sewage treatment, or a large-scale project of more than 1.000 tons, such as centralized sewage treatment in industrial parks, it can be built on demand.Before, there was a heating station in Dingxi, Gansu Province, which produced about 80 tons of sewage per day, containing a lot of waste heat and a small amount of oil pollution. Conventional 80-ton models are not in stock, and the technology of conventional models is not fully adapted to their sewage water quality.We specially went to the site to survey the site, combined with their sewage composition, site size and environmental protection discharge standards, customized 80 tons of integrated sewage treatment equipment, and optimized the pretreatment process to solve the problem of oil pollution treatment.
Source manufacturer of DIEN integrated sewage treatment equipment
Customized tonnage does not require complicated communication, and customers do not need to understand professional knowledge.As long as the customer states the actual daily sewage discharge, as well as the length, width and height of the site, the installation location, and the local environmental protection discharge standards, our engineers will combine this information to design the appropriate equipment tonnage, match the corresponding treatment technology, and produce detailed layout drawings.And it will not simplify the configuration, cut corners, and add additional costs because of customization. The quotation is transparent, and all configurations will be clearly stated.
Some people are worried that the customized tonnage will have a long cycle and delay the progress of their projects.Actually not.Conventional customized tonnage, such as customization between 50-200 tons, we can complete the production in 3-7 days, which is similar to the delivery cycle of conventional models.If it is a large-scale customized project, we will arrange the order in advance, plan the production time reasonably, and ensure that the delivery is on time without affecting the overall progress of the customer.
In general, the water volume specifications of sewage treatment equipment cover a wide range, 1-1000 tons are available in regular stock, and special tonnages can also be customized on demand.There is no need to reluctantly choose unsuitable specifications, and accurately match your own sewage discharge, which can not only save later operating costs, but also ensure the treatment effect, and successfully pass the EIA, which is both worry-free and guaranteed for customers.
