
Raw Water Issue:The mud and Wastewater from the mixing plant are turbid and contain a large amount of mud
Solution Process:Mud Wastewater+equipment+mud cake+clean water reuse
Processing Effect:Install plate and frame filter press to achieve water reuse
Ⅰ. Project Overview
Project Location: Engineering Project Department in Sichuan Province
Treated Water Source: Mixing station slurry wastewater, construction wastewater, concrete wastewater
Treatment Capacity: 30m³/h (customizable according to actual site demands)
Core Process: Slurry collection → Flocculation reaction → Solid-liquid separation → Sludge filter pressing → Clean water reuse
Recommended Equipment: Plate and Frame Filter Press (Click to view product details)
Wastewater Treatment System
Project Target: Zero discharge of slurry wastewater, clean water reuse, sludge dewatering, and environmental compliance
Ⅱ. Raw Water Quality Problems
The slurry wastewater from the mixing station of this project department features the following characteristics:
Extremely turbid water quality with high suspended solids content;
Large mud content and high sediment concentration; direct discharge easily causes pipeline blockage and environmental pollution;
The wastewater cannot settle naturally or be reused directly, resulting in water resource waste;
It fails to meet construction site environmental protection requirements and brings risks of environmental inspection penalties.
Without proper treatment, it will lead to site water accumulation, muddy roads, environmental penalties, water waste and severe equipment wear.

Ⅲ. Customer Treatment Requirements
Treat mixing station slurry wastewater to completely remove sediment and suspended solids;
Realize mud-water separation; press sludge into dry cakes for easy transportation;
Treated clean water can be reused up to standard for mixing station production, site watering, road dust suppression and concrete curing;
Stable system operation with simple operation, suitable for continuous use on construction sites;
Meet site environmental protection standards and achieve wastewater zero discharge.

Ⅳ. Recommended Equipment: Plate and Frame Filter Press Wastewater Treatment System
The plate and frame filter press is a high-efficiency solid-liquid separation equipment specially designed for treating slurry wastewater, construction Wastewater, mixing station wastewater, piling sludge and river silt. Equipment advantages: automatic plate pulling, high-pressure filtration, thorough filter pressing, stable operation and small footprint.

Ⅴ. Project Treatment Effect
The turbidity of slurry wastewater is greatly reduced with clear effluent;
Thorough solid-liquid separation; sludge is pressed into dry cakes without secondary pollution;
All treated clean water is reused, saving a large amount of tap water;
Realize construction site wastewater zero discharge and smoothly pass environmental inspections;
Low operating cost and simple operation, suitable for 24-hour continuous use on construction sites.
If your construction site, mixing station or project department is faced with problems such as turbid slurry wastewater, high mud content, substandard environmental protection and unavailable wastewater reuse, welcome to consult Xi'an DIEN Water Treatment. We specialize in providing plate and frame filter presses, slurry wastewater treatment equipment and zero-discharge solutions for construction site wastewater. For equipment selection, scheme design and quotation, please visit our official website for consultation. We provide one-stop Wastewater treatment services for you!