Service Hotline

+8617792214459

Cutting edge water treatment technology, all in line with industry trends

Focusing on the water treatment equipment industry, exporting hardcore knowledge and trend analysis

Reverse Osmosis Equipment

Here, understand the industry and connect to the future

New policy regulations, technological breakthroughs, market dynamics - real-time updates

Reverse Osmosis Equipment

Reverse Osmosis Equipment

Can't the product yield go up?With a 99.7% desalination rate, DIEN's secondary RO reverse osmosis equipment can solve it in one move!

Time:2026.06.04
Author:迪恩水处理

         The desalination rate of 99.7% is not a gimmick, it is the life and death line of the electronic pharmaceutical industry.

  Data show that the yield loss caused by water quality problems in the electronics industry is as high as 1% to 3%. If a pharmaceutical company fails a GMP flight inspection, the consequences will be discontinued. What are you most afraid of on the chip packaging or injection production line? It is that the water quality is not up to standard, causing the product to be scrapped in bulk. The desalination rate of DIEN's secondary reverse osmosis pure water equipment is stable above 99.7%, and the conductivity of water produced is as low as 0.1ΜS/cm, which can completely eliminate ion residues and microbial pollution, which can directly reduce your product yield from 1.2% to 0.15%, and save money every year. The labor cost exceeds 800.000 yuan.

  Don't let that “almost” water quality ruin your tens of millions of orders.When ordinary pure water equipment was still struggling with a 90% desalination rate, DIEN had already used a two-stage RO membrane series process to push the purity to the limit.This is not an option, but a just need for industry compliance-whether it is semiconductor wafer cleaning or sterile preparation production, water quality is a lifeline.

画板 39.jpg

  Direct supply from DIEN reverse osmosis equipment manufacturers

  Two-stage series deep purification, every ion has nowhere to escape

  Do you know why single-stage reverse osmosis equipment is difficult to meet the needs of high-purity water? It is because it can only remove 97% to 98% of impurities, and the remaining trace ions and organic matter are enough to cause the chip to short circuit or the drug to fail.DIEN's secondary reverse osmosis equipment uses a two-stage RO membrane series process to produce: first, a high-pressure pump is pressurized to trap salts and microorganisms; second, deep desalination removes residual ions, and the final desalination rate is greater than or equal to 99.7%.More importantly, for the high-hardness, high-salinity and alkali water quality in the Northwest region, we have selected anti-pollution RO membrane and strengthened pretreatment system, and the membrane element has a life span of more than 20.000 hours.

  Imagine that your equipment is under the control of a fully automatic PLC system, carrying out real-time monitoring of water quality and automatic flushing operations, and does not require special personnel to be on duty.This is not a science fiction content, but a real plan delivered by DIEN to an electronics factory in Xi'an. The conductivity of raw water is 1800µS/cm, and the water production is directly reduced to less than 0.5ΜS/cm. The equipment is in a stable operating state without failure after two years.

  Precise matching case studies in the electronic pharmaceutical and food industry

  What is the electronics industry afraid of? It is the residual ions that cause a short circuit after the wafer is cleaned. Our customer, a precision sensor factory in Xi'an, after using DIEN's 5T/H secondary reverse osmosis equipment, the defect rate of the product dropped sharply from 1.2% to 0.15%, saving 800.000 yuan in rework costs a year. This is not luck, but a real ability with a 99.7% desalination rate.  

     Pharmaceutical companies dare not be careless at all. An injection manufacturer in Shaanxi has selected DIEN 2T/H equipment. Its effluent can continue to meet the "Chinese Pharmacopoeia" purified water standard, and it has also passed GMP certification. After 3 years of operation, there has been no abnormal pollution of membrane components, and maintenance costs have been reduced by 25%.The food and beverage industry has also benefited from this. There is a winery in Shaanxi whose raw water has high hardness and contains a lot of sediment. After using DIEN's 1T/H two-stage pretreatment and secondary RO equipment, the product pass rate has increased to 99.8%, and the shelf life has been extended for 12 months.Which industry is your industry? Tell us, we will be able to match the plan right away.

9963

  Direct supply from DIEN reverse osmosis equipment manufacturers

  Price transparency is half cheaper than imports, local service is worry-free

  DIEN, a local physical manufacturer in Xi'an, imported equipment of the same specifications of the same brand starts at 800.000 yuan at every turn. It only costs 40% to 50% of the price. Small equipment from 0.5 to 2T/H is only 30.000 to 120.000. medium-sized equipment from 3 to 10T/H is only 150.000 to 350.000. and large equipment from 10 to 100T/H is only 400.000 to 2 million, and there is no middleman to increase the price.Here, if you want to know the approximate price range of our DIEN reverse osmosis equipment, you can refer to the price of reverse osmosis equipment: A comprehensive analysis by model and configuration. We DIEN provide free water sample testing, free program design, and free detailed quotations. There is no invisible consumption.

  Compared with foreign counterparts, the cost of DIEN's local services is 15% to 30% lower.The equipment went through 72 hours of linkage testing before leaving the factory.The local team in Xi'an was able to respond within 2 hours and achieve door-to-door delivery within 24 hours.In that case, your competitors are most likely already using DIEN equipment to reduce costs and improve efficiency. What are you waiting for?

  Ten years of 30.000+ cases, customer reputation is confidence

  Based in the field of water treatment in Northwest China for 10 years, it has a physical factory covering an area of 3.000 square meters and has more than 3.000 successful cases. It has provided services to large enterprises such as China Weapons, China Aerospace, and Yanchang Petroleum.Faced with such a transcript, would you think it is practical and reliable? The person in charge of an electronics factory in a certain place in Shaanxi directly expressed his attitude and said: “DIEN's secondary reverse osmosis equipment has been put into use for 2 years, and its water quality has always remained stable. It can achieve fully automatic operation and worry-free, and the after-sales response is rapid and on call. It is worth recommending.”.

  The purchasing manager of a pharmaceutical factory in Xi'an expressed more directly, saying: “After comparing the three, DIEN's plan is the most suitable for our high-hardness water quality. Its price is real, and it also provides one-stop installation and commissioning services, which saves worry and effort.”Customers don't lie, and data doesn't lie. DIEN's equipment has a low failure rate when it is running, and it has lifetime technical support, which allows you to have no worries from procurement to operation and maintenance.

1005.jpg

  Large reverse osmosis equipment

  One-stop customized free testing and zero-risk experience

  There is no need for you to spend money first and then try and make mistakes. DIEN provides a one-stop service for the whole process. Free door-to-door samples are taken to test the hardness, salinity and impurity indicators of raw water. According to your water production and site size, the design plan is based on the actual situation. A professional team will come to the door to install and debug and train operators. The warranty period is 1 year, lifetime maintenance, and regular return visits to monitor water quality.

  Can you try to imagine that if there is such a manufacturer, it is willing to test first and then make a quotation, design first and then charge, complete the installation first and then accept the acceptance, then why do you hesitate? Hurry up and contact DIEN Water Treatment to obtain water sample testing, program design and quotation for free, so as to prompt your production line to say goodbye to hidden dangers in water quality and achieve the goal of cost reduction and efficiency.

  At this moment, I want to ask you: What is the current water quality compliance ratio of your factory? Leave a comment in the comments area, and I will analyze the problem for you for free and give a solution.Like and bookmark this article, forward it to peers who also have a demand for high-purity water, and everyone will make a profit together!