Yes, that's possible. Let's discuss customization regarding dimensions. Due to the unique characteristics of our clients' installation sites—such as small machine rooms for well water filtration in rural areas, cramped spaces in workshop corners, and irregularly shaped reserved areas after the renovation of old factories—standard equipment often cannot be installed due to its excessive width or height. In such cases, customization is necessary. We can reduce the diameter of the tank, shorten the length of the equipment, or use a modular installation method to overcome space limitations. If embedded installation is required, the structure of the equipment can be adjusted according to the reserved dimensions to ensure a perfect fit and avoid wasting space.
DIEN Water Filtration Equipment Source Manufacturer
Different scenarios have significantly different water consumption requirements. A small agritourism business might only need 1 ton of water per hour, while factories and farms might require 5 tons, 10 tons, or even more. Standard models have a fixed flow rate; choosing a model with a high flow rate would waste electricity and increase costs, while choosing a model with a low flow rate would not meet the actual needs. We can customize the flow rate to meet specific needs, offering flexible adjustments from 0.5 tons per hour to tens of tons per hour without simplifying the process. For example, a customer at a Gansu aquaculture farm had raw water with high levels of silt and iron/manganese exceeding standards, requiring a flow rate of 3.5 tons per hour. Standard models didn't offer this specification, so our customization included adding a manganese sand filter layer and upgrading the fully automated operation.
Non-standard customization of water filtration equipment essentially solves the problem of "unsuitable" solutions. Whether it's size limitations or specific flow rate requirements, as long as the specific needs are clearly defined, we can create a suitable device that is both practical and hassle-free.
