Before many customers install demineralized water equipment, they are most concerned about two issues: what standard can the treated water reach, and is there any scale?After all, spending money to install equipment is to solve the problem of fouling from the root cause and protect boilers, pipelines and water equipment.
What standards can the water quality meet after installing the demineralized water equipment?
The core of demineralized water equipment is to remove calcium and magnesium ions from the water and turn hard water into soft water.After treatment, the hardness of the water quality can be reduced to an extremely low level, which fully meets the water requirements of boilers, central air conditioners, bathing and production processes.There are differences in standards for different scenarios. Industrial boiler water supply is the most stringent, with water hardness ≤0.03mmol/L, which is in line with GB/T 1576-2018 national standard; central air-conditioning circulating water ≤1.5mmol/L; domestic bathing, food processing and other scenarios ≤0.6mmol/L is enough.
Source manufacturer of DIEN demineralized water equipment
Will it still scale after installing the demineralized water equipment?
To be honest, basically not.Scale is the precipitate precipitated by calcium and magnesium ions after high temperature or concentration. After softening, the calcium and magnesium ions are almost removed. Without the core material of fouling, it is naturally difficult to generate scale.In places such as water kettles, water heaters, boilers, heat exchangers, and pipelines, after using demineralized water, there will no longer be a thick layer of scale, the thermal efficiency of the equipment will not decrease, and the life span can be extended.
A heating station in Dingxi, Gansu is a typical case.Before using groundwater, the hardness was high, and the pipes of the boiler and heat exchange station were fouled every year, and they had to be shut down and pickled twice a year, which was both expensive and affected heating.Later, our fully automatic demineralized water equipment was installed, which was designed according to boiler water standards, and the hardness of the effluent was stably controlled below 0.03mmol/L.After more than two years of operation, the inner wall of the boiler and the heat exchanger pipes are clean and there is no scale. The maintenance cycle has been extended from 2 times a year to 1 time in 5 years. The heating efficiency has been improved and the operation and maintenance cost has been reduced by more than half.
Some people are worried, will there be a small amount of residual ions?Under normal working conditions, the hardness of the effluent from the equipment of regular manufacturers is extremely low, and the residual amount is minimal, which is far from reaching the fouling conditions.However, if the equipment is not selected correctly, the resin is aging or the regeneration is not timely, there may be a slight increase in hardness, which is also the reason for regular maintenance.
Equipped with qualified demineralized water equipment, the hardness of the effluent can be stably up to standard, and the problem of scale can be completely said goodbye.Friends who don't know which equipment to choose may wish to learn about a DIEN water treatment company. It is an old factory with many years of strength. It has a good reputation in terms of reputation and product quality. Whether it is industrial boilers, commercial air conditioners, or domestic water, you can use it with confidence, worry-free and save money.
